Automatic Corrugated Paperboard Printing Machine

The main motor adopts the slip type clutch speed regulating motor, start in two steps, press “host boot” button, switch absorption and self-locking, indicator lights up. Open the control panel switch, the panel light will lit, rotate the speed control knob and the main motor output is electromagnetic torque drag load action.

Start the air compressor by pressing air pump "Start" button switch and self-locking, indicator lights up, air pump motor work

Semi-automatic chain paper feed and side check plate positioning that ensure accurate paper feed

There are four gear chain bars and each file has 3 cross-stack cardboard

Abrasion resistance materials as the support of the bottom of chains, fast running, low noise and low chain abrasion resistance

Main motor is placed under the working table

Equipped with block paper steel bar to ensure easy feeding of the bend cardboard

Ink roller equipped with idling running device that prevent ink from being dried when machine stops

Pneumatic lifting and down the anilox roller and auto ink distributing

Provided with pneumatic diaphragm pump to supply ink

Main transmission gears are made of 45#steel and high frequency quenching

Drive part adopts spray lubricating system that improves the precision and serve life of machine

Main gear adopts free-key connection and can long-time keep the printing accurate

Manual and automatic control option

The conveyor belt of the board catching arm and its tension can be adjusted independently without any inhibition of belt length. It is easy, flexible and rapid in adjustment

Use strong chain drive, lift-down move smoothly

Max stacking height 1300mm

The lift-down motor is equipped with the brake facility to keep it in the fix position

Pneumatic control baffle, use sensor control stacking

Back baffle position is adjusted manually according to the board length

The plain belt has good friction coefficient to avoid the board slide

One-piece structure, solid and stable, mounted with wheel shaft and can adjust the position of work at any time, designed with elastic rod on the axle, and easy defusing with continuous jitter

High elasticity rod, longer life and no damage to the cardboard

The height of the elasticity rod and defragment can be adjusted

It has a waste transfer device

The control of speed meter can be adjusted as the waste speed

The whole machine is easy to use and operate