Semi Automatic Corrugated Box Folder Gluer Machine
 

Electronic control and operation:

1.1 Power switch, general power

1.2 Front conveyor belt switch

1.3 Middle section conveyor belt switch: Manual and Automatic two types , while put sheet s up to 7pieces, turn knob to automatic, then belt run automatically, convey carton sheets.

1.4 Finished product conveyor belt switch: Manual and Automatic two types, and equipped with quantity setting system. For example, set every 10pcs sheets come out together, then push “RST” button, then screen display 10, then turn “TIME” knob clockwise +”,[-Ф+], then every 10pcs sheets will come out.

1.5 Gluing wheel switch

1.6 Back section press roller switch

1.7 Blower switch

1.8 Feeding table lift-down switch: Manual and Automatic two types

1.9 Emergency switch, while work abnormal, then push this switch, then all of motor stop running; if want recovery, twist the button toward the direction of arrow, then switch spring out.

1.10 Power indicator: Connected power, indicator light; turn off power, indicator light will be off.

2.1 In PCB the time relay mentioned “rise“ , it can control feeding table time means lift height. Twist the button clockwise, Front section stand light sensor time lengthen that means lift waiting time lengthen; on the contrary, twist it anticlockwise, then lift waiting time short.

2.2 The time relay that mentioned “Interrupt“, it controls middle section belt running time. Twist button clockwise, middle section light sensor work time lengthen, that means belt waiting time lengthen; on the contrary, belt waiting time short.