Electric Semi Auto Folder Gluer Machine

Send Inquiry

Product Code : 02

Price And Quantity

Minimum Order Quantity
1
Unit of Measure
Set/Sets

Price Or Price Range
USD ($)
Price Range
4000.00 - 15000.00 USD ($)

Product Specifications

General Use
Apparel, Beverage, Chemical
Material
Cardboard

Type
Paperboard Pasting Machine, Cardboard Gluing Machine, Carton Sealing Machine
Weight (kg)
2000 Kilograms (kg)

Automatic Grade
Semi Automatic
Drive Type
Electric

Voltage
220V/380V
Dimension(L*W*H)
4000x2000x1900 Millimeter (mm)

Sealing Speed
40m/min
Max.Feeding Size
2460mm

Min.Feeding Size
240mm
Feature
Other, Cross Cutter, Automatic Amending, Automatic Adjust, Touch Screen Operation, High Efficiency, Auto Counting, Lower Energy Consumption

Color
Black or blue

Product Description

4000Ãƒâ€”2000Ãƒâ€”1900mm Semi Auto Folder Gluer Machine Corrugated Carton Box Usage

Our offered Semi Automatic Carton Box Folding/Gluing Machine or Semi Automatic Corrugated Box Folder/Gluer machine is the last process equipment for the carton folding. It is used for the combination of 3 and 5 layer corrugated cardboard production line (if required to glue 7 layers cardboard, we can also produce according to our customersÃ¢â‚¬â„¢ need). Efficiency and production of the machine is quiet high. The prominent advantage is low cost, strong adhesion, simple operation, saves labor and electricity, runs smoothly and is idea equipment for exporting the advanced carton.

Main working unit

It consists of main body frame and 2 delivery stand
Main frame, up-down table, front delivery device, front gluing device, middle delivery device, middle press device and electric control device

Working Principle

Pour finished glue into the glue tank, switch ON all of the buttons, when the machine is running normally, turn ON the switch under the glue tank to let the glue flow into the gluing head, feed the sheets into machine and make sure one side gluing is even, another side pass through the pressing system to the adhesive gluing side, then pass through the middle pressing to perform the adhesive.

Installation and Testing

Fix the machine on a flat floor and adjust four anchor bolts provided, do balance the machine and fix the bolts
Connect power cable, green wire is PT and connect the machine conveyor with the main body and tight bolts
Connect electric wire, push front, middle, and push product conveyor switch, check whether the belt run direction is right. Belt should convey cardboard to the back section and if cannot, then direction is wrong, so, correct the electric power

Technical parameters

Max size( length+ width)	2460
Min size( length+ width)	340
Max size(width+ height)	1515
Min size( width+ height)	240
Height of feeding paper	900
Motor power	4
The length of Machine	4500
The width of Machine	2100
The weight of Machine	2000
Machine speed	40
Dimension(mm) lengthÃƒâ€”widthÃƒâ€”height	4000Ãƒâ€”2000Ãƒâ€”1900