Semi Auto Corrugated Rotary Die Cutting Machine , Chain Feeding Rotary Die Cutter

This machine with one air compressor (V0.17/8) prepared by users to supply air centrally through air pipe, air purification and electromagnetic valve, let cylinder control lower roller lift-down. Working pressure is 0.5-0.7Mpa.

This machine consists of die-cutting part and sheet feeding part.

1. Die-cutting part: It main includes upper and lower die-cutting roller and paper feeding roller. Adjust rod drive both side gears rotating to adjust paper feeding roll, so that adjust sheet thickness to prevent the sheet be damaged due to pressure.

2. Upper and lower roller is main roller to make and form carton box. Upper roller is wired polyurethane rubber, lower roller mount die. When machine is running, two rollers rotate make serrated knife cut-cover rubber, and then cutting sheet. After some times, the rubber is rough and rugged, affecting working quality, so need repair it.

3. This machine equipped with sand paper shaft to repair rubber, after some times repairs then it is thin, to change new rubbers. To improve use life, machine with axis movement in 40mm. The pressure be provided by air compressor, then through cylinder send pressure to make rollers running to cutting sheet